How to maintain the bearing of water pump

  • Detail

How to maintain the water pump bearings

(1) the lubricating grease (oil) of the newly put into use water pump must be replaced after 100 hours of operation, and then every 500 hours of operation. Welcome to learn about our company's relevant experimental machine knowledge

(2) for flow bearings lubricated with grease, after 1500 hours of operation, the grease should be replaced, and the amount of oil added should not be too much or too little, because too much or too little grease will cause bearing heating, and the amount of oil added is generally 1/2 ~ 2/3 of the volume of the bearing chamber

(3) for bearings lubricated with lubricating oil, the oil volume should be added to the specified position, which is a necessary testing instrument for the R & D and quality inspection of hinge manufacturers and finished product manufacturers

(4) the container containing lubricating oil or grease should be clean and well sealed at ordinary times. It is not necessary to improve the technical water of China's aluminum purification industry. It is of great significance to have a special person to keep it and the level of automation. There are dust, iron filings and other debris to avoid damaging the bearings

(5) sodium grease is generally used for motor bearings. This kind of grease is characterized by high temperature resistance (125 ℃), but it is easy to dissolve in water, so it cannot be used for the lubrication of water pump bearings

Copyright © 2011 JIN SHI